No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Best sellers
Earth ploughed fields, 28mm 1:56 scale
Ready to use set of two ploughed fields. Made from flexible resin and painted with natural mineral pigments. The models are extremely durable, water and stain resistand. They can be dry brushed, cut or flocked if desired. The pigments used are raw sienna or golden ochre sienna. You can choose between different or same colors...
28.00 €In stockShohatsu-class landing craft 1:56 (28mm)
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length: 17.5 inches (19cm), Width (of the hull): 2 inches (5cm), Height: 0.8 inches (42.3cm)Resin model. Tank and figures (painted by Mariah) NOT INCLUDED; shown only for scale purposes. a
15.00 €In stockDirt road – bent section , 20mm 1:72 scale
A flexible dirt road section without car tracks, only horse footprints and carriage tracks. Made from flexible resin and painted with bitumen of Judea. Size: Size: 8cm (3,14in) X 6cm (2,36in) Approximate weight: 20g
4.00 €In stockSidewalk, square tiles – with drain, 28mm,...
This well detailed sidewalk consists of square pavers and planter zones and has in addition a storm drain and manhole cover. Suitable for scenarios based in European cities, from mid XIX century onwards. Made from flexible resin and painted with Vallejo Acrylic Studio 42. Figures not included. Size: 20cm X 5cm (7,87in X 1,97in). Approximate weight 45gr.
4.25 €In stockDirt road – straight section small, 20mm...
This dirt road section has been designed to represent an old road without ruts (so they work for any scenario). Made from flexible resin and painted with bitumen of Judea. This dirt road section has been designed to represent an old road without ruts (so they work for any scenario). Size: Size: 20cm (7,87in) X 6cm (2,36in) Approximate weight:...
5.51 €In stockDirt road – 3-way junction, 15mm 1:100 scale
A flexible dirt road 3-way junction section with tracks. Made from flexible resin and painted with bitumen of Judea. Size: 7cm (2,75in) X 4cm (1,57in) Approximate weight: 13g
3.00 €In stockVietnam Five-Planks Houseboat 1:56 (28mm)
Vietnam Five-Planks Houseboat 1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length: 7.8 inches (19,5cm), Width (of the hull): 2 inches (5cm), Height: 1.8 inches (4,5cm)
13.50 €In stockCobblestone road – crossroad section, 28mm...
This cobblestone road section has been designed to represent an old road with relatively large rectangular cobblestones. Made from flexible resin and painted with Vallejo Acrylic Studio 42. Size: 12cm (4,72in) X 12cm (4,72in) Approximate weight: 45g
5.32 €In stockMulti-period 30-Foot Lifeboat 1:56 (28mm)
Multiperiod boat. It could be used from Roman times up to the Second World War. Created by Alf Comps for Barrage Miniatures. Length: 8.6 inches (21,2cm), Width (beam): 2,8 inches (6,5cm), Height: 1 inches (1,6cm) All orders over €150 have free shipping.
13.90 €In stockTraditional Asia Pacific house with woven...
Traditional Asia Pacific house with woven bamboo walls and palm leaves roof. Made from P.U. Resin Size: 11.5cm X 7.7cm X 4.5 cm. Height with roof 9.5 cm. Approx. weight 230 gr. All orders over 150€ will have free shipping.
25.50 €In stockDirt road – crossroad section, 28mm 1:56...
A flexible dirt road crossroad section with tracks. Made from flexible resin and painted with bitumen of Judea. Size: 11,5cm (4,52in) X 11,5cm (4,52in) Approximate weight: 55g
4.50 €In stockDirt road – straight section large, 20mm...
A flexible dirt road section without car tracks, only horse footprints and carriage tracks. Made from flexible resin and painted with bitumen of Judea. Size: Size: 40cm (15,74in) X 6cm (2,36in) Approximate weight: 95g
8.50 €In stockVietnam Yabuta Junk 1:56 (28mm)
Vietnam Yabuta Junk, used by South Vietnamese coastal patrol forces to check boats for smuggled arms and equipment, 1:56 (28mm). Created by Alf Comps for Barrage Miniatures. Length: 9 inches (23cm), Width (of the hull): 2.5 inches (6cm), Height: 2 inches (3,5cm) Model comprised of two pieces, the resine boat and the engine cabin, unpainted. This...
22.00 €In stockLCVP Higgins US landing craft 1:56 (28mm)
56 (28mm) Created by Alf Comps for Barrage Miniatures. Length (closed): 7.75 inches (19,5cm), Width (of the hull): 2.75 inches (7cm), Height: 2 inches (3,5cm) Resin model supplied with PLA (3d Printed) MG stations (two), cal.30 MGs (two), engine cover (for display) and ramp. Unpainted, figures not included. This model is also availabe in 1:100 scale...
26.50 €In stockDirt road – crossroad section, 15mm 1:00...
A flexible dirt road crossroad section with tracks. Made from flexible resin and painted with bitumen of Judea. Size: 7cm (2,75in) X 7cm (2,75in) Approximate weight: 16g
3.00 €In stockDUKW amphibious landing craft 1:56 (28mm)
A resin model of DUKW amphibious landing craft used in World War II by theU.S. Army and Marine Corps to ferry ammunition and equipment from supply ships in transport areas offshore to the fighting units at the beach. Created by Alf Comps for Barrage Miniatures. Made from P.U. resin, unpainted. Figures not included. Size: 17cm...
30.25 €In stockVietnam House with Bamboo Reed Walls 1:56...
Hut of bamboo walls and gable/hipped roof, placed on stilts. The set includes the house and the base (but not the struts). The model has interior texture and is easy to paint. Size: 11.5cm X 7.7cm X 4.5 cm. Height with roof 8.5 cm. Made from P.U. Resin Approx. weight 285 gr with the base and the roof. All orders over 150€ have free shipping.
28.50 €Product available with different optionsDaihatsu-class landing craft 1:56 (28mm)
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length: 10.75 inches (27,5cm), Width (of the hull): 2.75 inches (7cm), Height: 2.5 inches (4cm) Resin model supplied with two ramps (closed and open). Figures not included. We have also a slightly different model of the same landing craft in 28mm. The model is available also in 1/100 scale.a
26.00 €In stockRiver barge (Europe, XX century) 1:56 (28mm)
A 1:56 scale model of a flat-bottomed boat, used mainly for river and canal transportation of heavy goods. Created by Alf Comps for Barrage Miniatures. Made from P.U. resin, unpainted. Figures not included. Approximate weight: 155g Size of the barge: Length; 11.41" (29cm), Width; 3.38" (8,6cm). Size of the hold: Length; 6.5 inches...
22.50 €In stockLCM3 Landing Craft 1:56 (28mm)
1:56 (28mm) model of LCM-3 (Landing Craft Mechanized) for assault landing of vehicles. Created by Alf Comps for Barrage Miniatures. Length (closed): 9.44in (24cm), Width: 2.95 in (7,5cm), Height: 2,55 in (6,5cm) Approximate weight: 320g Resin model supplied with PLA (3d Printed) parts and ramp. Figures not included.The model is...
36.30 €In stockViking Ship 1:56 (28mm)
Created by Alf Comps for Barrage Miniatures. Length: 11.5 inches (29,5cm), Width (of the hull): 2.5 inches (6,5cm), Height: 9 inches (23cm) Resin hull and rudder. Resin and wood mast. Figures not included.a The rules for naval battles (designed for 28mm and actions on a 6'x 4' gaming area) can be downloaded for free from the WS&S website.
26.95 €In stockBK-2 (or Type D) Soviet Riverine Gunboat...
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length : 6.5 inches (16,5cm), Width : 1.75 inches (5,5cm), Height: 1.25 inches (3,5cm) Resin model with white metal DhsK (for the WWII version), unpainted. Tank and figure NOT INLCUDED. a
22.50 €In stockBirch Bark Canoe 1:56 (28mm)
1/56 scale model of traditional birchbark canoe used by Native American. The model is cut by the waterline. Made from P.U. resin, unpainted. Approximate weight: 15g (53oz) Length : 14cm (5.5 in) Width (of the hull): 3 cm (1.18 in) All orders over 150€ have free shipping.
12.00 €In stockMetro station entrance 1:56 (28mm)
This type of subway station entrance is characteristic for many European capital cities. The model is suitable for WWII urban combat scenarios. Created by Alf Comps for Barrage Miniatures. Made from P.U.resin. Figures not included. Size: 14cm X 5cm (5''5 X 1''96). Approximate weight 55gr.
15.00 €In stockFirebase howitzer emplacement 1:56 (28mm)
Size: 7.48 inches (19cm). Made from P.U.resin, unpainted. Figures not included. Approx. weight 250 gr. All orders over 150€ have free shipping.
12.00 €In stockVietnam Firebase shelter 1:56 (28mm)
Vietnam era U.S. firebase shelter. Made from P.U. resin, unpainted. Size: 3.5 x 3.5 inches (9cm). Approx. weight 95 gr.
7.50 €In stockCobblestone road – bent section, 20mm 1:72...
This cobblestone road section has been designed to represent an old road with relatively large rectangular cobblestones.Made from flexible resin and painted with Vallejo Acrylic Studio 42. Size: 8cm (3,14in) X 5,5cm (2,16in) Approximate weight: 19g This model is also available in 1:56 and 1:100 scale.
4.00 €In stockPanzerfäust 60, 28mm (1/56)
German WWII Panzerfaust 60 Anti-Tank Rocket Launcher 3D printed set with all parts separated, with very sharp detail. Unpainted. The set includes two crates with 4 pzf each. Made by Pinelas Miniatures. Available for custom order and size. Size: 2cm (0,78in) X 1,2cm (0,47) Weight: 4g
3.90 €In stockCobblestone/dirt road transition section...
Ready to use right oriented Y-shape transition section between cobblestone and dirt roads. Made from flexible resin and painted with Vallejo Acrylic Studio 42. The model is supplied withowt flock. Size: large 20cm (7,87in) X 7cm (2,75in) each side. Approximate weight: 60g
5.50 €In stockStone walls set, 28mm 1:56 scale
Ready to use set of 10 different stone walls with total length of 55in/140cm. Made from flexible resin and painted. The models are extremely durable, water and stain resistand. They are dry brushed with Vallejo acrylic color 42,also can be re-paint or flocked if desired. Approximate weight: 500g (1.10lb) Some of the pieces will...
27.90 €In stock
