United States of America 

Showing 1 - 18 of 18 items
  • Quick view
    25.00 €

    1:56 Light SEAL Support Craft - LSSC (28mm) Created by Alf Comps for Barrage Miniatures. Length: 6.5 inches (6,5cm), Width (of the hull): 2.5 inches (6,5cm), Height: 1.8 inches (4,5cm) The cockpit is removable. Contains four resin pieces (hull, deck and radar dome) and a piece of wire (the mast of the radar dome). The set needs to be assembled...

    25.00 €
    In stock
  • Quick view
    22.00 €

    Vietnam Yabuta Junk, used by South Vietnamese coastal patrol forces to check boats for smuggled arms and equipment, 1:56 (28mm). Created by Alf Comps for Barrage Miniatures. Length: 9 inches (23cm), Width (of the hull): 2.5 inches (6cm), Height: 2 inches (3,5cm) Model comprised of two pieces, the resine boat and the engine cabin, unpainted.  This...

    22.00 €
    In stock
  • Quick view
    26.50 €

    56 (28mm) Created by Alf Comps for Barrage Miniatures. Length (closed): 7.75 inches (19,5cm), Width (of the hull): 2.75 inches (7cm), Height: 2 inches (3,5cm) Resin model supplied with PLA (3d Printed) MG stations (two), cal.30 MGs (two), engine cover (for display) and ramp. Unpainted, figures not included. This model is also availabe in 1:100 scale...

    26.50 €
    In stock
  • Quick view
    31.40 €

     1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length (closed): 7.75 inches (19,5cm), Width (of the hull): 2.75 inches (7cm), Height: 2 inches (3,5cm) Resin model supplied with PLA (3d Printed) MG stations (two), cal.30 MGs (two), engine cover (for display) and rampThe model is accurate, but we made small changes to make it more...

    31.40 €
    In stock
  • Quick view
    18.15 €

    US Inflatable Boat with two sections of M2 Treadway. Length: 17cm (6.69’’), Width: 4,5cm (1.77’’) Approximate weight: 145g Made from P.U. resin, unpainted. Figures and vehicles not included.

    18.15 €
    In stock
  • Quick view
    36.30 €

     1:56 (28mm)  model of LCM-3 (Landing Craft Mechanized)  for assault landing of vehicles. Created by Alf Comps for Barrage Miniatures. Length (closed): 9.44in (24cm), Width: 2.95 in (7,5cm), Height: 2,55 in (6,5cm) Approximate weight: 320g Resin model supplied with PLA (3d Printed) parts and ramp. Figures not included.The model is...

    36.30 €
    In stock
  • Quick view
    26.50 €

    A resin model of the US Landing Craft, Personnel (Ramp) or LCP(R) , used in WWII. Length (closed): 7.48 inches (19cm), Width (of the hull): 2.55 inches (6,5cm), Height: 0.98 inches (2,5cm) The model is supplied with PLA (3d Printed) MG stations (two), cal.30 MGs (two), engine cover (for display) and ramp. Made from P.U. resin, unpainted....

    26.50 €
    In stock
  • Quick view
    11.20 €

    Vietnam Yabuta Junk, used by South Vietnamese coastal patrol forces to check boats for smuggled arms and equipment, 1:72 (20mm). Length: 6.69 in (17cm), Width (of the hull): 1.96 in (5cm), Height: 0.98 in (2,5cm). Approximate weight: 37g. Model comprised of two pieces, the resine boat and the roof of the engine cabin, unpainted.  This model is...

    11.20 €
    In stock
  • Quick view
    29.99 €

    A waterline version of the US Landing Craft, Personnel (Large) or LCP(L) , used in WWII. Length (closed): 7.48 inches (19cm), Width (of the hull): 2.55 inches (6,5cm), Height: 0.98 inches (2,5cm) The model is supplied with PLA (3d Printed) MG stations (two), cal.30 MGs (two) and engine cover (for display). Made from P.U. resin,...

    29.99 €
    In stock
  • Quick view
    31.21 €

    A waterline version of the Landing Craft, Personnel (Large) U.K. type, used in WWII. Length (closed): 7.48 inches (19cm), Width (of the hull): 2.55 inches (6,5cm), Height: 0.98 inches (2,5cm) Made from P.U. resin, unpainted. Approximate weight: 150g.  All orders of 150 euros will have free shipping  (Scroll down for more information)

    31.21 €
    In stock
  • Quick view
    20.57 €

    1:72 Light SEAL Support Craft - LSSC (20mm) Length: 4.72 inches (12,5cm), width (of the hull): 2.08 inches (5.3cm). Resin model with removable cockpit. Contains 3 resin pieces (hull, deck and radar dome), unpainted. The set needs to be assembled and painted. This model is also available in 1:56 scale. All orders over 150€ will have free shipping.

    20.57 €
    In stock
  • Quick view
    35.70 €

    A resin model of the  US Cougar 4x4 Personnel carrier MRAP (Mine Resistant Ambush Protected).  Made from P.U. resin, unpainted. Size: 11cm (4,33 in) X 5cm (1,96 in). Approximate weight:134g This model is also available in 6x6 configuration. All orders over 150€ will have free shipping.

    35.70 €
    In stock
  • Quick view
    35.70 €

    A resin model of the  US Cougar 6x6 Personnel carrier MRAP (Mine Resistant Ambush Protected).  Made from P.U. resin, unpainted. Size: 13cm (4,11 in) X 5cm (1,96 in). Approximate weight:160g This model is also available in 4x4 configuration. All orders over 150€ will have free shipping.

    35.70 €
    In stock
  • Quick view
    26.62 €

    A resin model of the  US Dodge WC52 ¾ Ton Truck.  Made from P.U. resin, unpainted, trailer not included. Size: 8,6cm (3,38 in) X 3,5cm (1,37 in). Approximate weight:25g This model is also available in 6x6 configuration. All orders over 150€ will have free shipping.

    26.62 €
    In stock
  • Quick view
    13.92 €

    Resin model of traditional Indochina wooden boat with a small shelter. Size: length 14cm (5.51in) width: 3,5cm (1.37in) Height with shelter 3,8cm (1.49) Unpainted, figures and baskets not included. Approximate weight: 38g.

    13.92 €
    In stock
  • Vintage wood stove 3D printed set of two wood stoves. The models have very sharp detail. Unpainted. Made by Pinelas Miniatures for Barrage Miniatures. Available for custom order and scale. Size: 1,5 cm (0,59in) X 1cm (0,39), height 1,5cm (0.59in), height with the pipe 2,5cm (0.98in). Weight: 4g

    5.45 €
    Add to cart
    Out of stock
  • Quick view
    12.00 €

    1/56 scale model of traditional birchbark canoe used by Native American. The model is cut by the waterline. Made from P.U. resin, unpainted. Approximate weight: 15g (53oz) Length : 14cm (5.5 in) Width (of the hull): 3 cm (1.18 in) All orders over 150€ have free shipping.

    12.00 €
    In stock
  • Quick view
    30.90 €

    1: 56 resin model of the Patrol Boat Riverine Mark 2, also known as PBR or “Pibber” used in the Vietnam War from March 1966 until the end of 1971. (28mm) Created by Alf M. Comps for Barrage Miniatures. Approximate weight: 120g Length : 17cm (6.69 in) Width (of the hull): 6 cm (2.36 in)  All orders over 150€ have free...

    30.90 €
    In stock
Showing 1 - 18 of 18 items