A resin model of generic clinker boat. Length: 8 inches (20,5cm), Width (beam): 2,4 inches (6cm), Height: 1.2 inches (2,6cm) All orders over 150 euros have free shipping.
Multiperiod boat. It could be used from Roman times up to the Second World War. Created by Alf Comps for Barrage Miniatures. Length: 8.6 inches (21,2cm), Width (beam): 2,8 inches (6,5cm), Height: 1 inches (1,6cm) All orders over €150 have free shipping.
Created by Alf Comps for Barrage Miniatures. Length: 3.6 inches (9,12cm), Width: 1.33 inches (3,3cm), Height: 0.47 inches (1,2cm)
1:56 Vietnam River Boat (28mm) Created by Alf Comps for Barrage Miniatures. Made from P.U.resin, unpainted. Figures not included. Length: 5.2 inches (12,2cm), Width (of the hull): 1.1 inches (2,8cm), Height: 0.66 inches (1,6cm) All orders over 150€ have free shipping.
Vietnam Five-Planks Houseboat 1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length: 7.8 inches (19,5cm), Width (of the hull): 2 inches (5cm), Height: 1.8 inches (4,5cm)
1:56 Light SEAL Support Craft - LSSC (28mm) Created by Alf Comps for Barrage Miniatures. Length: 6.5 inches (6,5cm), Width (of the hull): 2.5 inches (6,5cm), Height: 1.8 inches (4,5cm) The cockpit is removable. Contains four resin pieces (hull, deck and radar dome) and a piece of wire (the mast of the radar dome). The set needs to be assembled...
Vietnam Yabuta Junk, used by South Vietnamese coastal patrol forces to check boats for smuggled arms and equipment, 1:56 (28mm). Created by Alf Comps for Barrage Miniatures. Length: 9 inches (23cm), Width (of the hull): 2.5 inches (6cm), Height: 2 inches (3,5cm) Model comprised of two pieces, the resine boat and the engine cabin, unpainted. This...
Small Viking boat. Created by Alf Comps for Barrage Miniatures. Length: 7.5 inches (18,5cm), Width (of the hull): 1.5 inches (4cm), Height: 1.5 inches (4cm). Made from P.U.resin, figures not included.Unpainted.
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length: 10.75 inches (27,5cm), Width (of the hull): 2.75 inches (7cm), Height: 2.5 inches (4cm) Resin model supplied with two ramps (closed and open). Figures not included. We have also a slightly different model of the same landing craft in 28mm. The model is available also in 1/100 scale.a
56 (28mm) Created by Alf Comps for Barrage Miniatures. Length (closed): 7.75 inches (19,5cm), Width (of the hull): 2.75 inches (7cm), Height: 2 inches (3,5cm) Resin model supplied with PLA (3d Printed) MG stations (two), cal.30 MGs (two), engine cover (for display) and ramp. Unpainted, figures not included. This model is also availabe in 1:100 scale...
Pirate Boat , Dinghy 1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length: 10 inches (25,5cm), Width (of the hull): 3 inches (8cm), Height: 1.75 inches (4,5cm) Made from P.U. resin, unpainted.
Created by Alf Comps for Barrage Miniatures. Length: 11.5 inches (29,5cm), Width (of the hull): 2.5 inches (6,5cm), Height: 9 inches (23cm) Resin hull and rudder. Resin and wood mast. Figures not included.a The rules for naval battles (designed for 28mm and actions on a 6'x 4' gaming area) can be downloaded for free from the WS&S website.
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length (closed): 7.75 inches (19,5cm), Width (of the hull): 2.75 inches (7cm), Height: 2 inches (3,5cm) Resin model supplied with PLA (3d Printed) MG stations (two), cal.30 MGs (two), engine cover (for display) and rampThe model is accurate, but we made small changes to make it more...
Resin model of the German Leichtes Sturmboot 39. Length: 4.33 inches (11cm), Width: 1.18 inches (3cm), Height: 0.39 inches (1cm)
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length : 10.5 inches (28,5cm), Width (of the hull): 2.5 inches (6,5cm), Height: 1.5 inches (3,75cm) Resin model with two 3D printed cleats. The model is as accurate as possible, but please keep in mind that the information about this landing craft is fragmentary. a
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length : 6.5 inches (16,5cm), Width : 1.75 inches (5,5cm), Height: 1.25 inches (3,5cm) Resin model with white metal DhsK (for the WWII version), unpainted. Tank and figure NOT INLCUDED. a
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length : 4.75 inches (12cm), Width : 1.25 inches (3cm), Height: 0,75 inches (2,7cm) Resin model with 3D printed parts. Tank and figure NOT INLCUDED. a
28mm Italian landing craft. Created by Alf Comps for Barrage Miniatures. Length: 10.25 inches (27cm), Width: 2.25 inches (5,5m), Height: 1.25 inches (3cm) Resin model.Tank and figure NOT included.
Created by Alf Comps for Barrage Miniatures. Length: 4.33 inches (11cm), Width: 1.18 inches (3cm), Height: 0.39 inches (1cm) Resin model with 3D Printed outboard motor. Figures and vehicles NOT included.
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length : 0.75 inches (25cm), Width (of the hull): 2.75 inches (7cm), Height: 1.5 inches (4cm) Resin model with two 3D printed cleats and accesories white metal DhsK.Figures and tanks NOT INCLUDED. a
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length: 17.5 inches (19cm), Width (of the hull): 2 inches (5cm), Height: 0.8 inches (42.3cm)Resin model. Tank and figures (painted by Mariah) NOT INCLUDED; shown only for scale purposes. a
28mm Ottoman boat. Created by Alf Comps for Barrage Miniatures. Length of the boat: 10.5 inches (27cm), Width: 3 inches (7.5cm), Height: 2 inches (5cm). Deck length: 7.5 inches (19cm), Deck width 2.25 inches (5,5cm), Average gunwhale height: 0.75 inches (2cm)(If you need rules to play with this model, scroll down up to the "More Info" section,...
A 1:56 scale model of a flat-bottomed boat, used mainly for river and canal transportation of heavy goods. Created by Alf Comps for Barrage Miniatures. Made from P.U. resin, unpainted. Figures not included. Approximate weight: 155g Size of the barge: Length; 11.41" (29cm), Width; 3.38" (8,6cm). Size of the hold: Length; 6.5 inches...
A resin model of DUKW amphibious landing craft used in World War II by theU.S. Army and Marine Corps to ferry ammunition and equipment from supply ships in transport areas offshore to the fighting units at the beach. Created by Alf Comps for Barrage Miniatures. Made from P.U. resin, unpainted. Figures not included. Size: 17cm...
Resin model of Landing Craft, Rubber (Large). Created by Alf Comps for Barrage Miniatures. Made from P.U. resin, unpainted. Figures not included. Size: 10cm X 5cm (3,93in X 1,96in) Approximate weight: 35g
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length (closed): 8.26in (21cm), Width (of the hull): 2.36 in (6cm), Height: 2 in (3,5cm) Approximate weight: 155g Resin model supplied with PLA (3d Printed) parts and ramp. Figures not included.The model is accurate, but we made small changes to make it more playable, modifying...
1:56 (28mm) model of LCM-3 (Landing Craft Mechanized) for assault landing of vehicles. Created by Alf Comps for Barrage Miniatures. Length (closed): 9.44in (24cm), Width: 2.95 in (7,5cm), Height: 2,55 in (6,5cm) Approximate weight: 320g Resin model supplied with PLA (3d Printed) parts and ramp. Figures not included.The model is...
Length (closed): 9.25 inches (25cm), Width: 2.5 inches (6cm), Height: 2 inches (5cm). Resin model supplied with PLA (3d Printed) turret, mortar and accesories.This product will be cast especially on demand. If your order includes this item, it will take a few more days before we ship it. Approximate weight: 350g Figures not included.
US Inflatable Boat with two sections of M2 Treadway. Length: 17cm (6.69’’), Width: 4,5cm (1.77’’) Approximate weight: 145g Made from P.U. resin, unpainted. Figures and vehicles not included.
Vietnam Five-Planks Houseboat 1:72 (20mm) Length: 4.84 inches (12,3cm), Width (of the hull): 1.57 inches (4cm). Made from P.U. resin, unpainted. Figures not included. This model is available also in 1:56 (28mm) scale.