Created by Alf Comps for Barrage Miniatures. Length: 3.6 inches (9,12cm), Width: 1.33 inches (3,3cm), Height: 0.47 inches (1,2cm)
A resin model of generic clinker boat. Length: 8 inches (20,5cm), Width (beam): 2,4 inches (6cm), Height: 1.2 inches (2,6cm) All orders over 150 euros have free shipping.
Multiperiod boat. It could be used from Roman times up to the Second World War. Created by Alf Comps for Barrage Miniatures. Length: 8.6 inches (21,2cm), Width (beam): 2,8 inches (6,5cm), Height: 1 inches (1,6cm) All orders over €150 have free shipping.
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length: 10.75 inches (27,5cm), Width (of the hull): 2.75 inches (7cm), Height: 2.5 inches (4cm) Resin model supplied with two ramps (closed and open). Figures not included. We have also a slightly different model of the same landing craft in 28mm. The model is available also in 1/100 scale.a
56 (28mm) Created by Alf Comps for Barrage Miniatures. Length (closed): 7.75 inches (19,5cm), Width (of the hull): 2.75 inches (7cm), Height: 2 inches (3,5cm) Resin model supplied with PLA (3d Printed) MG stations (two), cal.30 MGs (two), engine cover (for display) and ramp. Unpainted, figures not included. This model is also availabe in 1:100 scale...
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length (closed): 7.75 inches (19,5cm), Width (of the hull): 2.75 inches (7cm), Height: 2 inches (3,5cm) Resin model supplied with PLA (3d Printed) MG stations (two), cal.30 MGs (two), engine cover (for display) and rampThe model is accurate, but we made small changes to make it more...
Resin model of the German Leichtes Sturmboot 39. Length: 4.33 inches (11cm), Width: 1.18 inches (3cm), Height: 0.39 inches (1cm)
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length : 10.5 inches (28,5cm), Width (of the hull): 2.5 inches (6,5cm), Height: 1.5 inches (3,75cm) Resin model with two 3D printed cleats. The model is as accurate as possible, but please keep in mind that the information about this landing craft is fragmentary. a
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length : 6.5 inches (16,5cm), Width : 1.75 inches (5,5cm), Height: 1.25 inches (3,5cm) Resin model with white metal DhsK (for the WWII version), unpainted. Tank and figure NOT INLCUDED. a
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length : 4.75 inches (12cm), Width : 1.25 inches (3cm), Height: 0,75 inches (2,7cm) Resin model with 3D printed parts. Tank and figure NOT INLCUDED. a
28mm Italian landing craft. Created by Alf Comps for Barrage Miniatures. Length: 10.25 inches (27cm), Width: 2.25 inches (5,5m), Height: 1.25 inches (3cm) Resin model.Tank and figure NOT included.
Created by Alf Comps for Barrage Miniatures. Length: 4.33 inches (11cm), Width: 1.18 inches (3cm), Height: 0.39 inches (1cm) Resin model with 3D Printed outboard motor. Figures and vehicles NOT included.
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length : 0.75 inches (25cm), Width (of the hull): 2.75 inches (7cm), Height: 1.5 inches (4cm) Resin model with two 3D printed cleats and accesories white metal DhsK.Figures and tanks NOT INCLUDED. a
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length: 17.5 inches (19cm), Width (of the hull): 2 inches (5cm), Height: 0.8 inches (42.3cm)Resin model. Tank and figures (painted by Mariah) NOT INCLUDED; shown only for scale purposes. a
This type of subway station entrance is characteristic for many European capital cities. The model is suitable for WWII urban combat scenarios. Created by Alf Comps for Barrage Miniatures. Made from P.U.resin. Figures not included. Size: 14cm X 5cm (5''5 X 1''96). Approximate weight 55gr.
A 1:56 scale model of a flat-bottomed boat, used mainly for river and canal transportation of heavy goods. Created by Alf Comps for Barrage Miniatures. Made from P.U. resin, unpainted. Figures not included. Approximate weight: 155g Size of the barge: Length; 11.41" (29cm), Width; 3.38" (8,6cm). Size of the hold: Length; 6.5 inches...
A resin model of DUKW amphibious landing craft used in World War II by theU.S. Army and Marine Corps to ferry ammunition and equipment from supply ships in transport areas offshore to the fighting units at the beach. Created by Alf Comps for Barrage Miniatures. Made from P.U. resin, unpainted. Figures not included. Size: 17cm...
Resin model of Landing Craft, Rubber (Large). Created by Alf Comps for Barrage Miniatures. Made from P.U. resin, unpainted. Figures not included. Size: 10cm X 5cm (3,93in X 1,96in) Approximate weight: 35g
1:56 (28mm) Created by Alf Comps for Barrage Miniatures. Length (closed): 8.26in (21cm), Width (of the hull): 2.36 in (6cm), Height: 2 in (3,5cm) Approximate weight: 155g Resin model supplied with PLA (3d Printed) parts and ramp. Figures not included.The model is accurate, but we made small changes to make it more playable, modifying...
1:56 (28mm) model of LCM-3 (Landing Craft Mechanized) for assault landing of vehicles. Created by Alf Comps for Barrage Miniatures. Length (closed): 9.44in (24cm), Width: 2.95 in (7,5cm), Height: 2,55 in (6,5cm) Approximate weight: 320g Resin model supplied with PLA (3d Printed) parts and ramp. Figures not included.The model is...
Length (closed): 9.25 inches (25cm), Width: 2.5 inches (6cm), Height: 2 inches (5cm). Resin model supplied with PLA (3d Printed) turret, mortar and accesories.This product will be cast especially on demand. If your order includes this item, it will take a few more days before we ship it. Approximate weight: 350g Figures not included.
A coconut-log barricades without built-in weapon emplacements. Made from P.U. resin, unpainted. Figures not included. Length : 12cm (4.72’’), Width: 3cm (1.18’’), Height: 2cm (0.78’’) 10,5cm X 10,5cm (4.13’’ X 4,13’’), Height: 2cm (0.78’’) Approximate weight: 58g
Made from P.U. resin, unpainted. Figures not included. Length : 15,5cm (6.10’’), Width: 10cm (3.93’’) Approximate weight: 215g
Made from P.U. resin, unpainted. Figures not included. Length : 20cm (7.87’’), Width: 7cm (2.75’’) Approximate weight: 145g
Made from P.U. resin, unpainted. Figures not included. Length : 17cm (6.69’’), Width: 11cm (4.33’’) Approximate weight: 220g
A flexible model of West wall Dragon's teeth. Size: 21,5cm (8,46inch) X 19,5cm (7,48inch), painted. Approx. weight 160g
US Inflatable Boat with two sections of M2 Treadway. Length: 17cm (6.69’’), Width: 4,5cm (1.77’’) Approximate weight: 145g Made from P.U. resin, unpainted. Figures and vehicles not included.
Resin model of pyramid-shaped steel pillboxes of Japanese defense on Betio Island. Made from P.U. resin, unpainted. Figures not included. Size: 9cm X 9cm (3.54’’ X 3,54’’), Height: 5cm (1.96’’) Approximate weight: 60g
A resin model of the German landing craft, used in WWII. The model comes with movable ramps. Made from P.U. resin, unpainted. Figures and vehicles not included. Approximate weight: 400g Length : 6.5 inches (15cm), Width (of the hull): 2.5 inches (5,8cm Length: 10.7 inches (27,5cm), Width: 3.4 inches (8,5cm), Height: 2 inches (5cm)
A resin model of the large German landing craft ( großes Pionier-Landungsboot 41 (gr. Labo 41) Length: 12 inches (33cm), Width: 4.2 inches (10,5cm), Height: 2.3 inches (6cm) Aprox. weight Made from P.U. resin, unpainted. Figures and vehicles not included.